14 Bolt REAR 40 spline 4340 Axle

14 Bolt REAR 40 spline 4340 Axle
Click To Enlarge
  • Item #: 14boltrearF350
  • Manufacturer: Burkey Racing
  • Manufacturer's Product Number: 14boltrearF350
  • Condition: New

THIS PRODUCT BUNDLES TOGETHER OUR 14 BOLT REAR AXLE ASSEMBLY AND OUR 14 BOLT 40 SPLINE 4340 CONVERSION PACKAGE.  THIS IS THE STRONGEST AND CHEAPEST WAY TO BUILD A 40 SPLINE REAR AXLE!

 

Are you wanting a BAD TO THE BONE axle that wont break the bank?  The GM 14 bolt is the way to go.  

We have been around the block and seen the evolution of axles.  The 14 bolt axle is hands down the strongest "for the money" axle in the 1 ton arena.  Its relatively light weight and super strong for its size. 

This axle trumps the dana 60 in strength due to its larger ring and pinion gear and a 3rd bearing on the snout of the pinion that keeps gear diflection down. 

Some of the biggest players in the offroad game have chosen the 14 bolt for its simpicity in gear set-up and brute strength.  Racers and trail riders know the 14 bolt will take a straight beat down and keep going.  This axle is what we recommend for guys running up to 800hp. 

*LABOR: INSTALL LABOR COST IS APPLIED TO EACH ADDITIONAL PART ADDED.  IF YOU WOULD LIKE A PART, BUT DO NOT WISH TO HAVE BUSTED KNUCKLE OFFROAD INSTALL IT, SIMPLY ADD THE ITEM SEPARATE FROM THIS AXLE ASSEMBLY IN YOUR SHOPPING CART. 

*BASE PRICE IS FOR A RE-TUBED AXLE HOUSING WITH YOUR CHOICE OF OFFSET AND WIDTH. 

OFFESTS:  We re-tube the axle with 3.5" x .500" wall D.O.M. tubing for custom pinion offsets.  If you need a specific offset for your axle we can build it to your specifications. 

SPOOLS/LOCKERS:  40 spline nitro spool standard.  Mark Williams 4140 chromolly spool upgrade available.

RING AND PINION GEARS: Yukon ring and pinion gears are used standard in our axle assembly.  We also have USA gear, Motive gear, Nitro gear, and Factory GM pull-out gears. Newer style ribbed housings have install kits that are slightly more expensive. 

YOKES: We only offer forged u-bolt style yokes for 14 bolt axles.  They are available in 1350, 1410, 1480, and rockwell pattern flange yoke styles. 

SEALS: 14 bolt axles never had seals at the differential.  When building a steering axle seals will need to be installed inside the axle tube.  We use a seal housing that has multiple dual-lip seals inline to keep oil in the differential and dirt out out of your gears.  

DIFF COVERS: 14 bolts have a big lip on them that KILL ground clearance.  Choose one of our lifetime replacement 3/8 plate diff covers that allow 1-3/8" additional ground clearance.  We can cut the lip off the differential for you or you can do it yourself 

HUBS: This axle will have our personal choice 2005+ F350 unit bearings

DRIVE FLANGES: This axle will come with Mark Williams Drive flanges and caps

 

 

**Lead times are usually 2 weeks** 

**Delivery charges will be assesed at the time of shippment.  $150-$200 is normal for a commercial delivery 

  * Marked fields are required.
*
*
*
*
Qty*
Price $400.00
Reviews (0) Write a Review
No Reviews. Write a Review